You are here

Measurement & Installation Guidelines

 

Measuring

If your room is rectangle shaped, then you're in luck. If not, then simply break the room up into rectangles to make odd shaped rooms simpler. Calculate the sections and then add them up. Be sure to measure from wall to wall. Do not forget the closets. After you calculate the rooms square footage, add about 10% for installation waste on standard grade products. If you are going to install molding, make sure to measure the perimeter of the room to get your linear footage as well as 10% for installation waste. If you need assistance please call us.  We want to help make your flooring project a success.

How Much to Order

Bundles and cartons of wood can vary in measurement depending on the product.  Some may be much larger and be much heavier when moving. When ordering, it is always recommended to order at least 10% more than your measurement. This extra will allow for defects that may be found among the boards and your own cuts and unusable pieces that will be leftover during installation. Because every product will vary and every person has a different installation process, there is a decent chance you will be leftover with extra material. This is normal and always recommended to have. We say this because there are many situations that may arise. For example, higher waster factor than expected during installation, future rooms that need flooring, and in case you need addtiional material to do a repair.

Installing Your Floor:

The National Wood Flooring Association (NWFA) is the leader when it comes to hardwood flooring education. They offer their own guidelines which Nature Wood Floors recommends to use for your own installation. If you are still searching for an installer for your product, the NWFA can also perform a search for certified installers in your local area.

The success of your installation will rely heavily on proper jobsite conditions being met prior to the floors installation. Your floor should not be brought on site until all windows and doors are installed and all drywall and paint or texturing is completed. Once on-site, your floor should be stacked in the area it is to be installed. Please allow at least 10 days for proper acclimatization for Solid floors and even longer for very dry or humid locations. Your flooring product should never be stored in an unheated area, or below grade.

All NWFA installation guidelines should be adhered to when installing your floor. In radiant applications, we highly recommend using a urethane-based adhesive as well as an engineered product that is meant for the extreme temperature changes that a radiant floor causes. Hickory, Maple, and Exotic Wood are some of the species that are not recommended for radiant floors because they are known to be less stable, even with an engineered product. Keep in mind, radiant floor installs are not covered by any warranty. Be sure to ask a representative for more details on radiant floors before purchasing.

All solid plank flooring is recommended to be stapled or nailed. We recommend a proper nailing schedule with a nail/staple typically every six to eight inches.

All hardwood floors are unique; knots, mineral streaking, length averages, color variations, and other natural effects are all part of your floors' character. Some boards may be deemed "less attractive" but are still expected to be used. These can be placed in an inconspicuous spots to help control the overall look, but understand some floors can have a high degree of natural marks that will be present all over. Consult with your installer prior to final installation.

Our floors are milled to be precise and stand up to the toughest standards of today’s world. But hardwood flooring is a natural product that is never perfect. Hardwood consistently moves with moisture levels in the air. Because of this, it is common to come across imperfections that can result in small gaps that can appear 1/16", 1/8", and even 1/4". These are not considered defects and are expected to be filled with an appropriate colored wood putty during installation. Hardwood floors are not expected to be perfect on every board, even cleaner Select & Clear grade floors can consist of the occasional defect.

Installation of any flooring constitutes acceptance of its grade, milling, and finish. So be sure to contact us before you install your floor if you feel your flooring material is not how it is supposed to be. Once installed, it can not be returned, credited, or swapped for another product.

Nature Wood Floors has no control over installation methods or site conditions, therefore, we cannot be held liable for any installation or site related issue. Nature Wood Floors assumes no liability for incidental or consequential damages. 

Any damage caused to the flooring as a result of the following will void any warranty:

  • Improper Installation: Proper NWFA guidelines must be followed, including subfloor preparation.
  • Storage/Jobsite Conditions: Product must not be stored in any area that can have excess moisture or dryness levels; no exposure to any moisture shall be permitted. Do not store over concrete or below grade.
  • Water Damage: Warranty does not include damage caused by flooding, faulty plumbing, moisture penetration, improper humidity levels, overflowing sinks, leaking appliances or any like occurrences.

Responsibilities of the Hardwood Floor Installer: 

The installer of your product is responsible for the proper handling, storage and installation of your hardwood floor. This includes final inspection of flooring prior to installation. Warranty's do not cover flooring with visible defects once it is installed. The installer is also responsible for making sure the flooring is installed over an acceptable, suitable sub-floor. Radiant floors are not covered in any warranty.